Overhead Oil-Based Power Primer™ Extreme Aerosol
Water, smoke and other tough stains often appear on ceilings, eaves and other hard-to-reach places. Don’t struggle with brushes or rollers. HGTV Home® by Sherwin-Williams Oil-Based Power Primer spray is made for overhead (or vertical) application to conveniently block tough and challenging stains. This oil-based aerosol spray primer blocks and seals stains like water, smoke, tannin, ink and grease and is ideal for drywall, wood, cured plaster, ceiling tiles, paneling and previously painted ceiling, eaves and more.
Paint Sheen Comparison
Available sheens for Infinity® Interior Paint and Primer
Flat
Low-sheen, non-reflective finish ideal for low-traffic areas.
· Master Bedrooms · Formal Dining Rooms
Flat
12 oz
Coverage
20 ft²/can - 25 ft²/can
Master the Art of Preparing Your Walls
Lauren Svenstrup shows you how to prep for success.
How to Use
-
UsageDrywall, wood, cured plaster, ceiling tiles, paneling and previously painted surfaces on ceilings, eaves and more
-
PrepSand shiny surfaces. Surfaces should be clean, dull and dry. Remove loose rust and paint with wire brush or sandpaper. Priming: Proper cleaning of surface before applying primer is critical on damaged substrate. Test spray in an inconspicuous area for compatibility.
-
ApplicationHold can 8"-12" from surface, spray in a sweeping motion from side to side with slight overlap. Avoid runs and drips by applying multiple thin coats; wait 5 minutes between coats.
-
Dry TimeDry Time @ 77 °F and 50 % Relative HumidityTo The Touch: 30 minute Recoat: 5 minute
-
Clean-up & DisposalTo clean paint on tip, wear eye protection and wipe off with regionally compliant solvent.
