How to Use

• Usage
  Properly prepared interior walls, trim and ceilings of previously painted or bare drywall, plaster, masonry, wood and primed metal.
• Prep
  Thoroughly clean the surface and allow to dry. Remove wallpaper and loose, peeling paint. Scrape and sand peeled or damaged paint. Sand glossy surfaces dull.
• Application
  Apply product when surface, air and product temperatures are between 50–90°F. Stir paint thoroughly. Intermix containers for uniformity. Apply with a premium-quality 1/4"–3/4" nap synthetic roller cover (woven roller covers are preferred like Purdy® White Dove™), nylon/polyester brush (like Purdy® XL®) or an airless sprayer (2000 psi, .015"–.019" tip). Thinning not required. Paint the ceiling first, then walls and trim. For roller application, cover approximately a 2' x 2' area using an "N" pattern. Finish with light roller strokes in one direction. Some deep or bright colors, surface conditions and application technique may impact coverage and require more than one coat to obtain complete hide.
• Dry Time
  Dry Time @ 77 °F and 50 % Relative Humidity
  To The Touch: 1 hour - 2 hour
  Recoat: 2 hour - 4 hour
• Clean-up & Disposal
  Clean up with warm, soapy water. Do not pour unused contents down the drain. Consult with local authorities for proper method of disposal and recycling.