How to Use

• Usage
  Properly prepared interior and exterior trim, molding, cabinets, doors, windows and walls of drywall, plaster, masonry, wood and primed metal.
• Prep
  Remove all surface contamination by washing with an appropriate cleaner, rinse thoroughly and allow to dry. Scrape and sand peeled or damaged paint to a sound surface. Sand glossy surfaces dull. Seal stains from water, smoke, ink, pen-cil, grease, etc. with the appropriate pri-mer/sealer. Caulk around windows, doors, and other openings after spot priming bare surfaces with HGTV HOME™by Sherwin-Williams High Gloss.
• Application
  Stir paint thoroughly. Intermix containers for uniformity. When air temperature is 35°F, substrates may be colder. Prior to painting, check to be sure the air, surface, and material temperatures are above 35°F and at least 5°F above the dew point. Avoid using if rain or snow is expected within 2-3 hours. Do not apply when air or surface temperatures may drop below 35°F within 48 hours. On large expanses of metal siding, the air, surface, and material temperatures must be 50°F or higher. No reduction necessary. Apply with a premium-quality brush, roller or an airless sprayer (2000 psi, .013"-.017" tip). Thinning not required. Certain deep or bright colors may require an additional coat for complete hide. Surface conditions and application technique may impact coverage.
• Dry Time
  Dry Time @ 77 °F and 50 % Relative Humidity
  To The Touch: 2 hour - 4 hour
  Recoat: 4 hour
• Clean-up & Disposal
  Clean up with warm, soapy water. Do not pour unused contents down the drain. Consult with local authorities for proper method of disposal and recycling.