Interior & Exterior Door & Trim Paint

Door & Trim Acrylic Urethane Enamel is an interior and exterior 100% acrylic with urethane enamel that applies like an alkyd but delivers characteristics you would expect of a water-based paint. It is easy to apply with its smooth-flowing properties and provides a factory-like finish. An exceptionally tough, durable coating that resists yellowing, provides a mold- and mildew-resistant finish and cleans up with soap and water.

  • 100% Acrylic with Urethane Enamel
  • Factory-like finish ultra-smooth, no brush marks
  • Exceptionally tough, durable formula
  • Applies like an oil-based paint
  • Smooth-flowing formula for easy application
  • Resists scuffs, stains and scratches
  • Non-yellowing formula
  • Provides a mold- and mildew- resistant finish
  • Soap-and-water cleanup
  • Available in Satin and Semi-Gloss sheens

Sheens

Satin, Semi-Gloss

Sizes

1 Quart, 1 Gallon


Coverage

400 ft²/gal



Available exclusively at Lowe's
Free store pickup available.
HGTV kitchen

EXCLUSIVELY AT LOWE’S®

We’re Number One

Sherwin-Williams is proud to be ranked #1 in customer satisfaction with interior paints by J.D. Power. We thank our customers for your loyalty and are honored to be recognized with this important award.

How to Use

  • Usage
    Properly prepared or previously painted interior and exterior doors, trim and cabinets.
  • Prep
    Remove surface contaminants with an appropriate cleaner, rinse thoroughly and allow to dry. Remove peeled or damaged paint. Sand glossy surfaces dull and wipe clean. Previously Painted: Spot prime bare areas with an appropriate primer, allow to dry, and paint entire surface. Wood, Plywood/Composition Board: Prime with an appropriate wood primer. For best results over heavily stained areas and bleeding woods such as redwood and cedar, use a coat of stain-blocking primer. Metal: Remove rust on galvanized surfaces and prime with a rust-inhibitive metal primer. Clean Mildew From the Surface: Mildew is a fungus that looks like dirt, but won’t wash off. Mildew must be removed before painting or it will grow through any new coat of paint. To remove mildew or suspected mildew, scrub surface before painting with a commercial mildew remover or a solution of 1-part liquid chlorine bleach to 3 parts water. Rinse thoroughly. Avoid contact with skin and eyes. Protect skin and eyes by wearing rubber gloves and eye goggles when working with bleach solution.
  • Application
    Stir paint thoroughly. Intermix containers to ensure uniform color. Apply with a premium-quality roller, premium-quality synthetic brush or airless sprayer. Some deep or bright colors, surface conditions and application techniques may impact coverage.
  • Dry Time
    Dry Time @ 77 °F and 50 % Relative Humidity
    To The Touch: 1 hour - 2 hour
    Recoat: 4 hour
  • Clean-up & Disposal
    Clean up with warm, soapy water. Do not pour unused contents down the drain. Consult with local authorities for proper method of disposal and recycling.
Recommended Coats
1, 2 coats
Dry To the Touch*
1 hour - 2 hour
Recoat*
4 hour
*Dry Time @ 77 °F and 50 % Relative Humidity

Data Sheets

Download the product data sheet (PDS) and safety data sheet (SDS) for
Interior & Exterior Door & Trim Paint
.
Product Number Sheen Base Container Size SDS PDS
035777969830 Satin Ultra White 1 Quart SDS PDS
035777969854 Satin Ultra White 1 Gallon SDS PDS
035777969861 Semi-Gloss Ultra White 1 Quart SDS PDS
035777969878 Semi-Gloss Ultra White 1 Gallon SDS PDS

Ratings & Reviews