How to Use

• Usage
  Test on walls, poster board or in multiple areas.
• Prep
  Be sure the surface is clean, dull and dry.
• Application
  Apply product when surface, air and product temperatures are between 50-90°F. Stir paint thoroughly. Apply with a premium-quality 3/8" - 3/4" nap synthetic roller cover, or nylon/polyester brush. Thinning not required. For roller application, cover approximately a 2' x 2' area using an "N" pattern. Cross roll to spread the paint. Finish with light roller strokes in one direction, at a right angle to the cross roll. Some deep or bright colors, surface conditions and application techniques may impact coverage and require more than one coat to achieve your optimal coverage.
• Dry Time
  Dry Time @ 77 °F and 50 % Relative Humidity
  To The Touch: 1 hour
  Recoat: 1 hour
• Clean-up & Disposal
  Clean spills, spatters, hands and tools immediately after use with soap and warm water. After cleaning, flush spray equipment with compliant clean up solvent to prevent rusting of the equipment.