Ceiling Paint

HGTV Home® by Sherwin-Williams Ceiling Paint features a spatter-resistant formula, so you can keep paint on your roller and off your floors. Its hiding power and flat sheen make covering up old stains a breeze, so you can confidently and easily refresh any room.

  • One-coat coverage
  • Stain-blocking paint & primer formula
  • Ideal for smooth or textured ceilings
  • Spatter-resistant and high-hiding formula
  • Flat sheen with a brilliant white finish
  • Lifetime Limited Warranty

Sheens

Flat

Sizes

1 Quart, 1 Gallon, 5 Gallon


Coverage

300 ft²/gal - 400 ft²/gal



Available exclusively at Lowe's
Free store pickup available.

How to Use

  • Usage
    Properly prepared interior ceilings of smooth or textured drywall, plaster, masonry, wood and acoustical tile
  • Prep
    Remove all surface contamination by washing with an appropriate cleaner, rinse thoroughly and allow to dry. Scrape and sand peeled or damaged paint to a sound surface. Sand glossy surfaces dull. Seal stains from water, smoke, ink, pencil, grease, etc. with the appropriate primer/sealer. Caulk around windows, doors, and other openings after spot priming bare surfaces with HGTV HOME™ by Sherwin-Williams Ceiling Paint.
  • Application
    Stir paint thoroughly. Intermix containers for uniformity. Apply product when surface, air and product temperatures are between 50-90°F. Apply with a premium-quality 3/8" - 3/4" nap synthetic roller cover (woven roller covers are preferred like Purdy® White Dove™), nylon/polyester brush (like Purdy® XL®) or an airless sprayer (2000 psi, .015"-.019" tip). Thinning not required. Paint the ceiling first, then walls and trim. For roller application, cover approximately a 2' x 2' area using an "N" pattern. Finish with light roller strokes in one direction. Surface conditions and application technique may impact coverage.
  • Dry Time
    Dry Time @ 77 °F and 50 % Relative Humidity
    To The Touch: 30 minute - 2 hour
    Recoat: 2 hour
  • Clean-up & Disposal
    Clean spills, spatters, hands and tools immediately after use with soap and warm water. After cleaning, flush spray equipment with mineral spirits to prevent rusting of the equipment.
Recommended Coats
1, 2 coats
Dry To the Touch*
30 minute - 2 hour
Recoat*
2 hour
*Dry Time @ 77 °F and 50 % Relative Humidity

Data Sheets

Download the product data sheet (PDS) and safety data sheet (SDS) for your .

Product Number Sheen Base Container Size SDS PDS
035777847206 Flat Ultra White 1 Quart SDS PDS
035777847213 Flat White 1 Gallon SDS PDS
035777847220 Flat White 5 Gallon SDS PDS

Ratings & Reviews