How to Use

• Usage
  Properly prepared or previously painted interior and exterior doors, trim and cabinets.
• Prep
  Remove surface contaminants with an appropriate cleaner, rinse thoroughly and allow to dry. Remove peeled or damaged paint. Sand glossy surfaces dull and wipe clean. Previously Painted: Spot prime bare areas with an appropriate primer, allow to dry, and paint entire surface. Wood, Plywood/Composition Board: Prime with an appropriate wood primer. For best results over heavily stained areas and bleeding woods such as redwood and cedar, use a coat of stain-blocking primer. Metal: Remove rust on galvanized surfaces and prime with a rust-inhibitive metal primer. Clean Mildew from the Surface: Mildew is a fungus that looks like dirt but won’t wash off. Mildew must be removed before painting, or it will grow through any new coat of paint. To remove mildew or suspected mildew, scrub surface before painting with a commercial mildew remover following manufacturer’s safety instructions.
• Application
  Stir paint thoroughly. Intermix containers to ensure uniform color. Apply with a premium-quality roller, premium-quality synthetic brush or airless sprayer. Some deep or bright colors, surface conditions and application techniques may impact coverage.
• Dry Time
  Dry Time @ 77 °F and 50 % Relative Humidity
  To The Touch: 2 hour
  Recoat: 4 hour
• Clean-up & Disposal
  Clean up with warm, soapy water.