How to Use

• Usage
  Properly prepared interior walls, trim and ceilings of previously painted or bare drywall, plaster, masonry, wood and primed metal.
• Prep
  Remove all surface contamination by washing with an appropriate cleaner, rinse thoroughly and allow to dry. Scrape and sand peeled or damaged paint to a sound surface. Sand glossy surfaces dull. Seal stains from water, smoke, ink, pencil, grease, etc. with the appropriate primer/sealer. Caulk around windows, doors, and other openings after spot priming bare surfaces with INFINITY® paint.
• Application
  Apply product when surface, air and product temperatures are between 50–90°F. Stir paint thoroughly. Intermix containers for uniformity. Apply with a premium-quality 1/4" – 3/4" nap synthetic roller cover (woven roller covers are preferred like Purdy® White Dove™), nylon/polyester brush (like Purdy® XL®) or an airless sprayer (2000 psi, .015"–.019" tip). Thinning not required. Paint the ceiling first, then walls and trim. For roller application, cover approximately a 2' x 2' area using an "N" pattern. Finish with light roller strokes in one direction. Some deep or bright colors, surface conditions and application techniques may impact coverage and require more than one coat to achieve your optimal coverage.
• Dry Time
  Dry Time @ 77 °F and 50 % Relative Humidity
  To The Touch: 1 hour - 4 hour
  Recoat: 2 hour
• Clean-up & Disposal
  Clean spills, spatters, hands and tools immediately after use with soap and warm water. After cleaning, flush spray equipment with compliant clean up solvent to prevent rusting of the equipment.